How To Whitewash My Stone Fireplace

Pour 1 part white paint in the bucket. The first step to whitewashing a stone fireplace is knowing how to make a whitewash.

How To Whitewash A Stone Fireplace Coffee With Summer in

Move furniture that is near the fireplace.

How to whitewash my stone fireplace. The hardest part about this job is deciding what color paint to use for your whitewash. My next attempt is to use a pearlescent paint in certain areas of it to give it extra shine in spots. You could also brush a sealer on the stone before you paint.

I suggest using a bucket for this, though you won’t need much to finish a whitewash well. All you really need is paint, water, brushes and rags. See more ideas about stone fireplace, whitewash stone fireplace, fireplace.

This is an easy job completed in one afternoon. If you have thought about brightening up your brick or stone fireplace, annie sloan chalk paint is your answer! Or try a watered down chalk paint.

All you have to do is mix white paint and water in equal portions. We use this tv mount for hanging our tv above the fireplace. If you want more of the stone to show through use a bit more water.

Cover everything around the fireplace. In this post, i'm partnering with behr to share with you how to whitewash a stone fireplace, including before and after photos! One of the easiest and fastest ways to lighten up your fireplace is to whitewash it.

I used a 50/50 mix of my paint and water. Annie kauffman fireplace ugly stone fireplace makeover Chalk paint worked well for this and the grey tone looks really nice against my bright white walls.

If you then paint w/the chalk paint and don't like it, you can scrub it off w/water and soap. I ended up adding more water to the mixture every 15 minutes or so. I can go lighter if i want to but i actually liked it after one layer.

All i did was use a rag and a paint brush and quickly painted it on the fireplace with the brush and came back through with the rag on each stone. I whitewashed my fireplace just to lighten it a little. I was a bit nervous, but i felt confident in the paint, along with some research that i had done.

I dipped my brush in and swirled it around a bit to make sure the water took, and then i’d paint. Take your designated painting rag and form a ball over the tips of your fingers. Start off by cleaning your fireplace a bit.

This is actually fairly easy. The photo below shows my two mixtures. I used a damp towel and wiped down the whole thing to get rid of dust, dirt and any loose junk.

The darker color seemed too severe for me. One it was well mixed, she dipped in her painting mitten and began gently brushing the stone. I ended up having my white mixture mostly paint with just a little bit of water mixed in.

Matte paint is a must. The rag was more for keeping the watery paint contained and not dripping all over the place. One last final before (oh, and take notice of those two weird openings above the stove and watch how the disappear, all thanks to the hubs!).

Push your rag with whitewash into the stone. Pour 4 parts water in the bucket. An old towel you can throw away.

Clean your stone with warm soapy water. Haven’t done it yet but plan to shortly. Of course mask off everything else &.

All you do is water down your paint (20 to 30%), and brush away. Clean your stone with warm soapy water. Take your paint, water and tupperware and create your whitewash mixture.

Cover the floor with plastic and adhere it to the area around the fireplace with painters' tape. If you cannot move it, cover it. No matter what ratio you use, make note of it and repeat it!

If this doesn’t work, you can either go completely opaque or remove it. It is important to dab paint off the brush after every dip into the paint mixture. I whitewash my stone fireplace also last summer.

I simply vacuumed all of the stone on my fireplace. If you have suit buildup on your fireplace i would suggest using a stone cleaner to thoroughly clean it before whitewashing. Following are the supplies i recommend to whitewash a stone fireplace.

My stone is also a. Now to apply the whitewash. While the paint is still wet follow up with your dry rag to blot any excess paint.

Dab your brush on a rag to remove excess mixture. (test first, but some chalk paints will scrub off easily enough. The first step will be to clean your fireplace of any dust, ashes, or suit etc.

It’s a “no going back now” kind of step. If your stone or brick is super glossy and slick or pretty dirty (unlike ours which was very porous and relatively dirt/soot free), you may need to use a product like tsp to get the job done. Submerge just the ball you formed into the whitewash and once that is good and wet press your rag into the stone.

Just neutral white paint, diluted 4:1 and i would use a spray bottle, a small roller & work it in with a small brush. Apply the whitewash mixture one small section at a time. The 1:1 mixture of paint allowed for some of the natural variation in the color of the stone to come through.

Apply in light even strokes, blending the mixture into the stone or brick. Look into masonry paint, lighten it w/water, and try that. Insert a wide paint brush into the whitewash solution and paint it onto the stone fireplace making sure to work the bristles around any curves and in the mortar crevices.

Please note the supplies are clickable if you want to purchase directly: I picked up a can of benjamin moore’s 1475 greystone and a painting mitten at the local ace hardware. Use your staining pad to wipe any excess whitewash mixture.

Using a spare bucket and a paint stick i had my sister bronwyn mix up a 50/50 batch of water and the greystone paint. I also used a latex paint which did come out fine and a brush. We had to drill with a masonry bit through the stone but it was.

Continue painting the fireplace until it is completely covered in a thin coat of the whitewash mixture. Emma chapman march 01, 2019. Make up your paint mixture.

Supplies needed to whitewash a stone fireplace. I did approximately 3/4 paint and 1/4 water. Take your paint, water and tupperware and create your whitewash mixture.

Dip your brush lightly into mixture and take off any excess. Number of coats will depend on the coverage you are looking for. I used watered down ivory paint and i sponged it on.

0a7c429f61c9514959fdbbe1ad087568.jpg (736×552) Painted